Ten Easy Tips for Installing Ceiling Fan

Expert Article By: Masni Rizal Mansor

Current info about ceiling fan is not always the easiest thing to locate. Fortunately, this report includes the latest ceiling fan info available.

You may be a ?do it yourself? (DIY) expert, having installed countless ceiling fans in numerous homes?both yours and those of various family and friends. However, even though you have the basics down, every DIYer knows: there?s always another trick out there to make the process a little easier. So although the following is not an exact step-by-step guide to installing a ceiling fan, this should give you a few hints to make the process a breeze!

When buying, remember that not all fans were created alike. In addition to price and style, some other factors to consider when buying your fan are:

Motor: more inexpensive fans often have an outer covering of thin metal, which increases the likelihood of rattles, clicks, hums, or buzzes during operation. Since many fans are installed in bedrooms, this can become an important consideration

Blades: Blade pitch can determine how effectively air is moved?an optimum pitch is 14 degrees. Also ensure that blades are balanced to avoid wobble.

Lighting: As in any other lighting situation, keep in mind lighting that is appropriate to the room?s size and function.

Room size: Not surprisingly, fans and rooms both vary in size. Make sure they vary accordingly in your house! Fans usually come in seven sizes, ranging from 32" to 56" blade spans. Come to the store armed with room measurements and speak with a lighting representative.

Mounting: For best results, fan blades need to be a minimum of seven feet above the floor, and have 12" clearance below the ceiling. For lower ceilings, choose a close or low-ceiling mount fan. With higher ceilings, you can purchase a standard or angled mount with an extension down rod.

Bonus! For maximum effect, purchase a reversible fan that helps cool you in the summer and pushes warm air down from the ceiling in the winter to keep you comfortable year round.

Make a list and check it twice. At the most basic level, you?ll need the ceiling fan/light kit, screwdrivers, wire strippers, a circuit tester, pliers, and step ladder. If you need to replace the ceiling box, you?ll also need a new ceiling box, a hammer, and a drywall saw. Run through the installation process in your mind before actually picking up a tool to ensure that you have all the necessary components?nothing is more frustrating than being stuck on a step ladder, holding up the ceiling fan, and realizing the tool you need is tucked away in the toolbox in the basement!

Is everything making sense so far? If not, I'm sure that with just a little more reading, all the facts will fall into place.

Inventory the fan as you unpack. As you take the fan out of its box, give yourself plenty of room to inventory the multitude of pieces and parts. Then lay the parts out in order of installation. This way, you?ll be confident that you have all the parts before you start, and you?ll be able to move smoothly from one step to the next.

Turn off the electricity! You already know this, but it?s always worth mentioning. Turn off power to the light?s circuit breaker or fuse. Ensure the circuit is truly ?dead? by checking with a high-voltage neon tester. If you?re working at night, a flashlight might be handy at this point.

Mounting the box: Always use a metal junction box?not plastic. Another item to keep in mind when mounting the box is that there?s several ways to mount it, depending on whether the box is next to a joist, in-between joists, or being mounted on a beamed ceiling. If no fixture was in the room previously, find the center of the room by snapping chalk lines diagonally between opposite corners. Also, the mounting must be able to withstand vibration, as even the most balanced fans cause some level of vibration when running.

Assemble. This step varies from one manufacturer to the next. Pay close attention to the specific instruction for your fan brand and style. However, keep in mind that if there is less than a screwdriver?s length between the blade and the ceiling, it might be easier to install the blades before hanging the fan. When you are finished, again check all screws for tightness.

Hang fan for wiring. Install the hanger hook or attach the ceiling plate to the fan box, whichever is appropriate for your fan model. If attaching a hanger bracket, but sure to use a lock washer, which will help prevent the fan?s vibration from loosening screws in the future.

Wiring the fan. To facilitate the wiring process, swag kits can make installation easier than ever. To improve ease of use once the fan is installed, you can also wire the ceiling fan through a fan speed control. Always electrically ground the fan to both the metal box and itself, using the grounding wires (typically either green or bare copper).

Let there be light! Install the light kit and controls you have chosen. This step typically varies according to individual models. However, in general the wires are provided with plug-in connectors. Be sure to tighten everything securely. Install the globe(s) and the light bulb(s).

Troubleshooting wobbles. Fan wobbles can range in severity from a minor irritation to a seriously hazardous situation. If you notice your fan wobbling, the first step is to take off the blades and examine them. Look for bent or misshapen blades. If you don?t see any obvious deformities, weigh them to determine if one is lighter or heavier than the rest. If one is underweight, affix a soft object such as an eraser to the middle on the top and see if that resolves the problem. For wobbles that are still unexplained, fan balancing kits with detailed instructions are also available.

You?re finished! Pat yourself on the back and enjoy the delightful breeze from your new ceiling fan.

You can't predict when knowing something extra about ceiling fan will come in handy. If you learned anything new about ceiling fan in this article, you should file the article where you can find it again.

About The Author Masni Rizal Mansor is co-publisher of MyFurnitureOnline.com. He provide tips and review on designer furniture,comtemporary furniture and how to locate discount furniture store.